Images purporting to reveal the original version of Apple's MagSafe charger today surfaced online, providing a look at how the company conceived of the accessory over two and a half years before its release.
The images, shared by the Apple leaker and prototype collector known as "Kosutami," claim to show the original version of the MagSafe charger that Apple considered launching. The prototype has a production date of March 2017, a key period in the development of Apple's AirPower wireless charging mat. This version of MagSafe was apparently developed directly alongside AirPower.
The earlier version of MagSafe for iPhone features a rubberized outer shell that feels similar to the base of the HomePod, rounded edges, a different array of magnets with opposite magnetism, and a large Apple logo. It is apparently the same approximate size as the final version, but noticeably thinner. The design language distinctively harks back to an earlier period in Apple's history that more generously used white rubberized plastics and featured its logo more prominently.
Unreleased prototype of MagSafe Charger. It’s super rare yet interesting. Featured different design, magnetic placement, and materials used. Produced around Mar. 2017, which same the AirPower does. Project started over after its cancellation. Infos in last pic. #appleinternalpic.twitter.com/lxTQqhgk5s
— Kosutami (@KosutamiSan) January 10, 2024
Following the cancelation of AirPower in March 2019, Apple apparently revisited this earlier MagSafe concept and rebooted the project. It ultimately launched with the design we know today alongside the iPhone 12 in October 2020, seeming to taking direct inspiration from the Apple Watch's charger with a thicker silver aluminum outer shell, flat sides, and no Apple logo.
The ultimately released version of MagSafe for iPhone (2020).
While the iPhone 17 Pro and iPhone 17 Pro Max are not expected to launch until September, there are already plenty of rumors about the devices.
Below, we recap key changes rumored for the iPhone 17 Pro models as of April 2025:
Aluminum frame: iPhone 17 Pro models are rumored to have an aluminum frame, whereas the iPhone 15 Pro and iPhone 16 Pro models have a titanium frame, and the iPhone ...
Apple may have updated several iPads and Macs late last year and early this year, but there are still multiple new devices that we're looking forward to seeing in 2025. Most will come in September or October, but there could be a few surprises before then.
We've rounded up a list of everything that we're still waiting to see from Apple in 2025.
iPhone 17, 17 Air, and 17 Pro - We get...
Tuesday April 15, 2025 6:31 am PDT by Tim Hardwick
Apple is preparing a "bold" new iPhone Pro model for the iPhone's 20th anniversary in 2027, according to Bloomberg's Mark Gurman. As part of what's being described as a "major shake-up," Apple is said to be developing a design that makes more extensive use of glass – and this could point directly to the display itself.
Here's the case for Apple releasing a truly all-screen iPhone with no...
The first iOS 19 beta is less than two months away, and there are already a handful of new features that are expected with the update.
Apple should release the first iOS 19 beta to developers immediately following the WWDC 2025 keynote, which is scheduled for Monday, June 9. Following beta testing, the update should be released to the general public in September.
Below, we recap the key...
Apple's upcoming foldable iPhone (or "iPhone Fold") will feature two screens as part of its book-style design, and a Chinese leaker claims to know the resolutions for both of them.
According to the Weibo-based account Digital Chat Station, the inner display, which is approximately 7.76 inches, will use a 2,713 x 1,920 resolution and feature "under-screen camera technology." Meanwhile, the...
A common complaint about the iPad Pro is that the iPadOS software platform fails to fully take advantage of the device's powerful hardware.
That could soon change.
Bloomberg's Mark Gurman today said that iPadOS 19 will be "more like macOS."
Gurman said that iPadOS 19 will be "more like a Mac" in three ways:Improved productivity
Improved multitasking
Improved app window management...
Apple is working on a new version of the Vision Pro with two key advantages over the current model, according to Bloomberg's Mark Gurman.
Specifically, in his Power On newsletter today, Gurman said Apple is developing a new headset that is both lighter and less expensive than the current Vision Pro, which starts at $3,499 in the U.S. and weighs up to 1.5 pounds.
Gurman said Apple is also...
Apple has confirmed that it will be permanently closing its retail store in the heart of Bristol, England, and there is no replacement in sight.
Apple Bristol in 2023
Apple Bristol will be closing its doors on Saturday, August 9, due to redevelopment plans at the Cabot Circus Shopping Centre, and the adjacent Bristol Shopping Quarter. According to news reports, and a building application, the ...
Thursday April 10, 2025 4:19 am PDT by Tim Hardwick
Apple in October 2024 overhauled its 14-inch and 16-inch MacBook Pro models, adding M4, M4 Pro, and M4 Max chips, Thunderbolt 5 ports on higher-end models, display changes, and more. That's quite a lot of updates in one go, but if you think this means a further major refresh for the MacBook Pro is now several years away, think again.
Bloomberg's Mark Gurman has said he expects only a small...
Literally cleaner, as the white rubbery one would have become dirty over time.
Not just dirtier but would slowly wear overtime due to friction and heat. We've seen the longterm damage Apple's old rubber accessories used to go through, especially the Mac's original magsafe. There's a reason for Magsafe 3 they went with woven cables instead of rubber.
I love the tactile feeling (even better if accompanied by the iOS chime) of the MagSafe charging disc when attaching to iPhone. It's also particularly nice to 'push' the disc off iPhone when a silicone MagSafe case is attached.
This kind of stuff that Apple do so well seems to be under appreciated.
Not just dirtier but would slowly wear overtime due to friction and heat. We've seen the longterm damage Apple's old rubber accessories used to go through, especially the Mac's original magsafe. There's a reason for Magsafe 3 they went with woven cables instead of rubber.
Apple switched to woven for all of their power adapter cables across the entire product line likely for this reason. Their old proprietary power adapters were notorious for failing. I think the I replaced the "UFO" power adapter on my old Pismo PowerBook G3 at least 3 times in the six years I had it. All of my MagSafe MacBooks had to have the power adapters replaced at least once, sometimes twice. To me the biggest win from Apple wasn't the return of MagSafe 3, it's the fact that the power cable between the brick and the laptop are now replaceable without discarding the whole charger.
I am really glad they didn't go with that rubber design. Having the puck be flat metal makes a lot more sense and a lot cleaner.
Literally cleaner, as the white rubbery one would have become dirty over time. [That said, I do like the ”vintage” feel of the prototype. I would be crazy about an iPhone mini in a version of the original iPhone’s body, with no MagSafe and no camera array.]
Apple switched to woven for all of their power adapter cables across the entire product line likely for this reason. Their old proprietary power adapters were notorious for failing. I think the I replaced the "UFO" power adapter on my old Pismo PowerBook G3 at least 3 times in the six years I had it. All of my MagSafe MacBooks had to have the power adapters replaced at least once, sometimes twice. To me the biggest win from Apple wasn't the return of MagSafe 3, it's the fact that the power cable between the brick and the laptop are now replaceable without discarding the whole charger.
That problem with the rubber sheathing, especially at the point when it entered the brick or similar object was so problematic. Why did it take Apple such a long time to switch out of that rubber sheathing? You see the issue also with Lightning cables at the Lightning end. Over time, it is possible for that rubber sheathing close to that tip to sort of bulge out, possible because of the rubber bending back and forth over time. Terrible.
And, we're not talking about cheap cables either! These cables, relative to other brands, are on the expensive range.